DIESEL CORE PRICING

This page lists our current diesel core buy list and pricing. If you have any questions, please don’t hesitate to call. Please note that demand and pricing are subject to change. Please call to confirm pricing at time of sale.

Turbochargers

(return to top)

Turbo Cores Requirements

1. All turbos must be complete with all parts
2. Turbo must spin 360 degrees with minimal effort
3. No broken shafts
4. Vane controller/actuator must be present and undamaged on VGT turbo
5. No excessive shaft play
6. Housings must be undamaged both internal and external

This is the criteria for a full price core. Please call if your core doesn’t meet this criteria, we can discuss the adjusted value of your core. Pictures will be required**

Fuel Injectors

(return to top)

Injectors Core Requirements
1. Injector must be complete with all parts
2. Injector tip must be intact
3. No heavy rust or body or fire damage units

4. Solenoid/harness must be undamaged
5. Must have complete undamaged plug/connector
6. No dismantled unit

**This is the criteria for a full price core. Please call if your core doesn’t meet this criteria, so we can discuss the adjusted value of your core, Pictures will be required**

Injection Pumps

(return to top)

Pumps Core Requirements
1. All pumps must be complete with all parts
2. Pump must rotate 360 degrees
3. Pump shaft must be undamaged
4. CP3’S must have all freeze plugs in them
5. CP3’S must have undamaged FCA
6. All mounting points need to be intact
7. No dismantled units
8. No heavy rust or body/fire damage units
9. Connectors/solenoids must be undamaged
11. Pumps with damaged/without IPR’s or FCA’s require a $30. deduction.

**This is the criteria for a full price core. Please call if your core doesn’t meet these criteria, so we can discuss the adjusted value of your core. Pictures will be required**

High Pressure Oil Pumps

(return to top)

ECMs

(return to top)

ECM Modules Core Requirements
1. ECM modules must be intact with all screws and hardware. Must not rattle or have loose components.
2. Plugs must be undamaged including pins
3. No water/fire damaged units
4. No broken housing/covers.

**This is the criteria for a full price core. Please call if your core doesn’t meet this criteria, so we can discuss the adjusted value of your core. Pictures will be required**